Natural decorative textured coating of natural cork
SPLAST – is a liquid mixture made from natural cork powder and special polymers. It is applied with an air-spaying method on any surface. Ease of use, aesthetics, functionality, durability and ease of use – these qualities are combined in one product.
Amazing decorative effect
Excellent Hydro, heat, and sound insulation
High degree of steading
Rock-solid adhesion to any surface
Prevents surface cracking
High application efficiency in any climate conditions
SPLAST could be applied to any type of surface by air sparing using spray gun attached to the compressor. Working pressure is 4 atmospheres, injectors used from 4 to 6 mm. When applying to porous fragile surfaces (silicate blocks, bricks, plaster), it is recommended that these surfaces be treated with an acrylic primer of deep penetration.
Before usage, the material should be mixed in a mixer at low speed until a uniform consistency is obtained. To control the viscosity a small amount of pure water (up to 200 ml) can be added.
The drying time is from 6 to 12 hours at an ambient temperature of 20°C. Depending on the application thickness, the time can be increased to 48 hours.
The material is not hazardous, not flammable and not toxic. Nevertheless, one should always clean the working tool with water, wash hands after work with warm water and soap.
To achieve a decorative coating of 2 mm thickness, it is necessary to spend 1.0-1.2 kg / m² (application in 1 layer). To obtain a heat-saving decorative coating with a thickness of 4.0-4.5 mm – the material consumption will be2.2-2.5 kg / m² (application in 2 layers).
Various capacities are used for the storage and transportation of our products. Eurocubes and barrels of various sizes, can reliably protect the products.
“DEM Company” actively develops channel and partner network in Belarus, Russia and the CIS countries. We supply our
+375 (29) 645-64-56
A wide range of liquid rubber of our own production allows to choose the right material for waterproofing! Find the suitable to your needs Liquid Rubber®!
Liquid Rubber Belarus presents an innovative technology of a seamless membrane system on the construction market. We produce high-quality waterproofing, anticorrosive, environmentally friendly water-based coatings (one- and two-components). Possessing unique properties, the materials of Liquid Rubber Belarus can be applied in various spheres.
PPTUE “DEM Company” is an exclusive manufacturer of liquid rubber on the territory of the Republic of Belarus. Liquid Rubber presents advanced technology of seamless membrane system in the construction market.
Our company provides not only unique materials, but also new technologies, new installment techniques and technology training. We will gladly answer any questions and give professional advice.