tel. +4915903135067 (eng. Speaking)
tel. +375 212 67 47 43 (rus. Speaking)
fax. +375 212 67 44 81 (rus. Speaking)
mob. +375 29 511 67 04 (rus. Speaking)
mob. +375 29 645 64 56 (rus. Speaking)
High-quality waterproofing and protection for concrete surfaces
Liquid Rubber DryLar® is a water-based bitumen emulsion modified by polymers. The material is applied to protect concrete structures both above ground level and below. The applied coating has no seams, junctures and protects the treated surface from the penetration of water and salt for 100%, and also protects against any chemical effects. It is used as a two-component system in combination with an inorganic salt solution to create an instantly solidification coating. The material is elastic. Allows to avoid appearance of cracks and gaps at the settlement of structures during the period of operation.
Liquid Rubber DryLar® is an alternative to usual hot applied bituminous coatings and solvent-based protective coatings, it is easier to use than a finished polymer film.
Liquid Rubber DryLar® is applied in combination with an inorganic salt solution as a two-component instantaneous solidification system. The equipment and training are provided by Liquid Rubber.
Liquid Rubber DryLar® should be applied onto dry surfaces cleared from dirt, dust, oil and grease. The product should not be applied at the temperatures below + 5°C. DryLar® can be applied as a primer without a solution of inorganic salt.
Liquid Rubber DryLar® is applied within 1.4 – 2.5 l/m2, depending on the desired thickness of the membrane. DryLar® becomes dry to the touch in one minute and reaches full solidification within 48 hours. DryLar® does not require the use of protective fencing and you can start backfilling immediately. Usually one construction team can cover 500-750 m2 per day.
Various capacities are used for the storage and transportation of our products, which are available in our assortment. Euro-cubes and barrels of various volumes allow product protecting reliably.
Only for industrial use. Keep away from children. Avoid storage at temperatures below + 5°C. Please, study the passport of technical safety of Liquid Rubber DryLar® before use.
“DEM Company” actively develops channel and partner network in Belarus, Russia and the CIS countries. We supply our
+375 (29) 645-64-56
A wide range of liquid rubber of our own production allows to choose the right material for waterproofing! Find the suitable to your needs Liquid Rubber®!
Liquid Rubber Belarus presents an innovative technology of a seamless membrane system on the construction market. We produce high-quality waterproofing, anticorrosive, environmentally friendly water-based coatings (one- and two-components). Possessing unique properties, the materials of Liquid Rubber Belarus can be applied in various spheres.
PPTUE “DEM Company” is an exclusive manufacturer of liquid rubber on the territory of the Republic of Belarus. Liquid Rubber presents advanced technology of seamless membrane system in the construction market.
Our company provides not only unique materials, but also new technologies, new installment techniques and technology training. We will gladly answer any questions and give professional advice.