SealRoof A-1260

SealRoof A-1260® Multifunctional coating for waterproofing of pools and reservoirs

SealRoof A-1260® – is a water base two-component polymer mastic used for elastic finishing waterproofing of the pools, ponds and other water structures.

SealRoof A-1260® – can be used as a surface coating applied on any surface. It has good chemical and temperature resistances. Can also be used in potable water storage tanks.

SealRoof A-1260® – two-component color acrylic composition on a water basis, with special fillers, ready for usage. The coating obtained has a high resistance to most chemicals used for water purification, found in both swimming pools and in industrial treatment plants.

Applying SealRoof A-1260®

The surface should be dry and firm, free from substances that prevent the material from adhering to the surface, for example, dust, exfoliated surfaces, oils, etc., Mineral porous substrates such as concrete or plasters should be primed with SealRoof A-1260® at 200- 300 g / m2.

Mixing of components: Components A (mastic) and B (hardener-plasticizer) are packed in two separate containers in the required proportion (by weight). All the contents of the container with component B should be poured into the container with component A. Mix both components for approximately 5 minutes using a low-speed drill. In order to distribute the hardener evenly, it is important that the mixture is thoroughly mixed especially the places near the walls and the bottom of the container.

Storage and Transport of SealRoof A-1260®

Various capacities are used for the storage and transportation of our products. Pails can reliably protect the products.